CPAP C-444 Spezifikationen PDF herunterladen (Seite 9)

- 6 -

BATTERY PACK OPERATION

 If the DC Power Cord will not directly and tightly fit in the CPAP

machine you will need to use one of the connector tips provided to

complete the connection between the Battery Pack and the machine.

 Determine which connector tip fits in the DC input port on the

CPAP machine. Attach that connector to the end of the DC Power

Cord of the Battery Pack then connect the DC Power Cord to the

Battery Pack.

If you have trouble locating the correct connector tip, please refer to

additional instructions on the next page.

 Once the connection between the Battery Pack and the CPAP

machine is complete, press the ON/OFF button on the machine.

Your CPAP machine should start functioning.

 If your Battery Pack is turned off, push and hold the TEST button

on the Battery Pack for 10-15 seconds. The green LED lights should

illuminate on the power meter.

 Connect DC Power Cord to the DC IN/OUT JACK (B) on the

Battery Pack.

 Connect the DC Power Cord to the DC input port located on the

CPAP or Bi-Level machine.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

CPAP C-444 Spezifikationen Seite 9